Restoring A Configuration; Additional Configuration; Set The Time And Date; Set The Administrator Password - Fortinet FortiWiFi FortiWiFi-60B Install Manual
Fortios 3.0 mr6
Hide thumbs
Also See for FortiWiFi FortiWiFi-60B:
- Install manual (92 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Restoring a configuration
Restoring a configuration
Additional configuration
Set the time and date
Set the Administrator password
32
Should you need to restore the configuration file, use the following steps.
To restore the FortiWiFi configuration
1
Go to System > Maintenance > Backup & Restore.
2
Select to upload the restore file from your PC or a USB key.
The USB Disk option will be grayed out if the FortiWiFi unit supports USB disks
but none are connected.
3
Enter the path and file name of the configuration file, or select Browse to locate
the file.
4
Enter a password if required.
5
Select Restore.
The FortiWiFi unit will load the configuration file and restart. Once the restart has
completed, verify that the configuration has been restored.
With the FortiWiFi connected and allowing traffic to pass-through, there are a few
other configuration. While not mandatory, they will help in ensuring better control
with the firewall.
For effective scheduling and logging, the FortiGate system date and time must be
accurate. You can either manually set the system date and time or configure the
FortiWiFi unit to automatically keep its time correct by synchronizing with a
Network Time Protocol (NTP) server.
To set the date and time
1
Go to System > Status.
2
Under System Information > System Time, select Change.
3
Select your Time Zone.
4
Optionally, select Automatically adjust clock for daylight saving changes.
5
Select Set Time and set the FortiGate system date and time.
6
If you want to synchronize the time with an NTP server, enable the option.
7
Select OK.
Note: If you choose the option Automatically adjust clock for daylight saving changes, the
system time must be manually adjusted after daylight savings time ends.
The default administrator password is no password. You will want to apply a
password to prevent anybody logging into the FortiWiFi and changing
configuration options.
FortiWiFi-60B FortiOS 3.0 MR6 Install Guide
01-30006-0447-20080131
Configuring
Advertisement
Table of Contents
