Fortinet FortiWiFi 60D Installation Instructions Manual

Netsurion

Download this manual

Firewall Installation

Instructions

Please review the diagram on the next page. This is our

typical installation which fits most organizations. If your

particular environment requires a different setup, please

make sure you can easily locate the referenced devices.

If your site uses PPPoE or a static IP and you have not

given that information to Netsurion, please make sure to

have it ready and let the Netsurion support engineer know

before proceeding with the install. If you do not understand

the above terms, that's ok! Simply reach out to us at

(800) 559-8157 for support.

Your firewall, when received, should be stored in a secure,

room-temperature location such as your back office. Do not

store your firewall in high-temperature areas.

Thank you from,

Netsurion Support Team

techsupport@netsurion.com

Page 1 Firewall Installation Instructions Please review the diagram on the next page. This is our typical installation which fits most organizations. If your particular environment requires a different setup, please make sure you can easily locate the referenced devices. If your site uses PPPoE or a static IP and you have not given that information to Netsurion, please make sure to have it ready and let the Netsurion support engineer know before proceeding with the install.
Page 2 Connect the antenna (included with firewall). Make sure they are pointed perpendicular to the ground at 90° angles. This allows for wireless access point detection. Connect all devices to ports 2 - 7. This would include PC’s, Terminals, Failover/Failback Options: Servers, DVR’s, etc.