Inner Finisher And Hole Punch Unit - Toshiba e-Studio2000AC Hardware Troubleshooting Manual
E-studio5005ac series;
e-studio5008a series;
e-studio5008lp series.
multifunctional digital colog system /
multifunctional digital systems.
Hide thumbs
Also See for e-Studio2000AC:
- Printing manual (174 pages) ,
- Software installation manual (164 pages) ,
- Copying manual (132 pages)
Table of Contents
Advertisement
1.TROUBLESHOOTING FOR THE HARDWARE
Inner Finisher and Hole Punch Unit
Lift up the control panel and then open the front cover of the finisher.
1
While holding the green lever, move the finisher to the left until it stops.
2
Pull down the green lever on the right-hand unit of the finisher.
3
The paper exit of the equipment opens.
4
Turn the green dial clockwise to send the paper and remove it.
Clearing a Paper Misfeed 57
Hide quick links:
Advertisement
Table of Contents
