Inner Finisher And Hole Punch Unit - Toshiba E-STUDIO 2020ac Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
 Inner Finisher and Hole Punch Unit
Lift up the control panel and then open the front cover of the finisher.
1
While holding the green lever, move the finisher to the left until it stops.
2
2
Pull down the green lever on the right-hand unit of the finisher.
3
The paper exit of the equipment opens.
Turn the green dial clockwise to send the paper and remove it.
4
2
1
2
1
1
Clearing a Paper Misfeed 53