Drawers (E-Studio2000Ac/2500Ac) - Toshiba e-Studio2000AC Hardware Troubleshooting Manual
E-studio5005ac series;
e-studio5008a series;
e-studio5008lp series.
multifunctional digital colog system /
multifunctional digital systems.
Hide thumbs
Also See for e-Studio2000AC:
- Printing manual (174 pages) ,
- Software installation manual (164 pages) ,
- Copying manual (132 pages)
Table of Contents
Advertisement
1.TROUBLESHOOTING FOR THE HARDWARE
Drawers (e-STUDIO2000AC/2500AC)
The first drawer
Open the drawer, press the paper down until the plate clicks and remove the misfed paper.
1
Check that the guide width is correct, there is no folded/curled paper or overloading (especially
2
for thick paper), and then close the drawer.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides. In
particular, be sure that the upper limit for thick paper is not exceeded when placing thick paper in the first
drawer. The amount of thick paper you can load in the drawer is lower than that for plain paper.
The second to fourth drawers
Open the paper source drawer, and remove the misfed paper.
1
30 Clearing a Paper Misfeed
Hide quick links:
Advertisement
Table of Contents
