Toshiba e-Studio2000AC Hardware Troubleshooting Manual page 83
E-studio5005ac series;
e-studio5008a series;
e-studio5008lp series.
multifunctional digital colog system /
multifunctional digital systems.
Hide thumbs
Also See for e-Studio2000AC:
- Printing manual (174 pages) ,
- Software installation manual (164 pages) ,
- Copying manual (132 pages)
Table of Contents
Advertisement
1.TROUBLESHOOTING FOR THE HARDWARE
4
Take the new waste toner box out of the carton.
5
Put the used waste toner box in the plastic bag and seal it with adhesive tape.
6
Clean the LED print head (for e-STUDIO2000AC/2500AC) or the slit glass (except for
e-STUDIO2000AC/2500AC).
e-STUDIO2000AC/2500AC: Perform steps 5 to 11 on P.90 "The Main Chargers and LED Print Heads
(e-STUDIO2000AC/2500AC)".
Except for e-STUDIO2000AC/2500AC: Perform steps 5 to 9 on P.93 "The Main Chargers and Slit Glass
(e-STUDIO2505AC/3005AC/3505AC/4505AC/5005AC, e-STUDIO5008LP Series)".
7
Push the new waste toner box securely until the upper latches click.
8
Close the front cover pressing both edges.
Replacing the Waste Toner Box (Color Models / e-STUDIO5008LP Series) 83
Hide quick links:
Advertisement
Table of Contents
