Mira Vision Owner's Installation Manual page 27

Insert fixing screws through holes in
Wall Brackets and fix to wall. Do not
fully tighten at this stage. Use template
to set correct distances between Wall
Brackets. Fully tighten screws.
Note! Slots in Wall Brackets allow for
adjustment. Use one horizontal slot
and one vertical slot.
Make sure that holes for Slide Bar
Securing Screws are positioned
correctly, as shown.
Position Slide Bar over Wall Brackets
and secure with screws. (Do not
overtighten.)
Fit Slide Bar End Caps into top and
bottom of Slide Bar Assembly. Push
and twist caps until they "click" and
lock in place.
27
1184347-W2-G