Yamaha FJR1300N 2001 Service Manual page 611

Installing Riv-Nut ports in the FJR's Headers
Here the riv-nut is assembled on the tool and inserted into the hole ready to go.
One squeeze of the handle is sufficient. Attempting to compress the riv-nut
further will only strip the threads. As described earlier, unscrew the tool from the
insert using the removal knob.
http://www.micapeak.com/bike/FJR1300/howto/rivnut.html (4 of 10) [15/05/2003 5:56:43 PM]