Disassembling The Rear Brake Caliper - Yamaha FJR1300N 2001 Service Manual

FRONT AND REAR BRAKES
EAS00626
DISASSEMBLING THE REAR BRAKE
CALIPER
NOTE:
@
Before disassembling the brake caliper, drain
the brake fluid from the entire brake system.
1. Remove:
• union bolt 1
• copper washers 2
• brake hose 3
NOTE:
@
Put the end of the brake hose into a container
and pump out the brake fluid carefully.
2. Remove:
• brake caliper piston 1
• brake caliper piston seals 2
a. Blow compressed air into the brake hose
joint opening a to force out the piston from
the brake caliper.
WARNING
@
• Cover the brake caliper piston with a rag.
Be careful not to get injured when the pis-
ton is expelled from the brake caliper.
• Never try to pry out the brake caliper pis-
ton.
b. Remove the brake caliper piston seals.
4 - 38
CHAS