Synchronizing The Throttle Bodies - Yamaha FJR1300N 2001 Service Manual

ADJUSTING THE VALVE CLEARANCE/

SYNCHRONIZING THE THROTTLE BODIES

9. Install:
• all removed parts
NOTE:
@
For installation, reverse the removal proce-
dure.
EAS00050
SYNCHRONIZING THE THROTTLE BODIES
NOTE:
@
Prior to synchronizing the throttle bodies, the
valve clearance and the engine idling speed
should be properly adjusted and the ignition
timing should be checked.
1. Stand the motorcycle on a level surface.
NOTE:
@
Place the motorcycle on a suitable stand.
2. Remove:
• rider seat
• fuel tank
• T-bar
Refer to "SEATS AND FUEL TANK".
3. Remove:
• caps 1
4. Install:
• vacuum gauge
(onto the pipes)
• engine tachometer
(onto the spark plug lead of cylinder #1)
Vacuum gauge
90890-03094
Engine tachometer
90890-06760
5. Install:
• fuel tank
Refer to "SEATS AND FUEL TANK".
6. Start the engine and let it warm up for sev-
eral minutes.
3 - 21
CHK
ADJ