Yamaha FJR1300N 2001 Service Manual page 363

PICKUP COIL ROTOR
2. Tighten:
• pickup coil rotor bolt 1
NOTE:
@
While holding the generator rotor 2 with the
sheave holder 3, tighten the pickup coil rotor
bolt.
Sheave holder
90890-01701
3. Apply:
• sealant
• (onto the crankshaft position sensor lead
grommet)
Yamaha bond No. 1215
90890-85505
4. Install:
• pickup coil rotor cover 1
NOTE:
@
Align the hole a into the pickup coil rotor
cover with the pin b.
5 - 44
ENG
45 Nm (4.5 m · kg)
12 Nm (1.2 m · kg)