Yamaha FJR1300N 2001 Service Manual page 106

1 ECU
2 Tail/brake light lead
3 Seat lock cable
4 Fuel tank breather hose
5 Fuel tank overflow hose
6 Air filter case breather hose
È To the intake air temperature sensor
É Fasten the wire harness with a plastic band to
the frame.
Ê To the inside of the U-lock storage box
Ë Fasten the tail/brake light lead with a plastic
band to the frame.
CABLE ROUTING
Ì Pass the tail/brake light lead between the rear
cover and frame.
Í Pass the wire harness on the inside of the seat
lock cable.
Î Support the wire harness and ignitor unit lead
with the cable holder attached to the tray.
Ï Pass the fuel tank breather hose and fuel tank
over flow hose through the hose guide.
Ð Pass the fuel tank breather hose and fuel tank
overflow hose between the swingarm and uni-
versal joint.
2 - 50
SPEC