Yamaha FJR1300N 2001 Service Manual page 312

SHAFT DRIVE
2. Install:
• shims (as calculated)
• final drive pinion gear
• bearing retainer
(with the bearing retainer wrench 1)
CAUTION:
@
The bearing retainer has left-hand threads.
To tighten the bearing retainer, turn it
counterclockwise.
@
Bearing retainer wrench
90890-04050
3. Install:
• gear coupling 1
• nut 2
(with the coupling gear/middle shaft tool 3)
Coupling gear/middle shaft tool
90890-01229
CAUTION:
@
Apply LOCTITE
@
4. Lock the threads with a drift punch.
5. Install:
• ring gear bearing housing
(along with the ring gear, but without the
thrust washer)
6. Adjust:
• ring gear backlash
Refer to "MEASURING THE RING GEAR
BACKLASH" and "ADJUSTING THE RING
GEAR BACKLASH".
4 - 110
CHAS
110 Nm (11.0 m · kg)
110 Nm (11.0 m · kg)
®
to the nut.