OIL PAN AND OIL PUMP
EAS00362
REMOVING THE OIL PAN
1. Remove:
• oil level switch 1
• oil pan 2
• gasket
• dowel pins
NOTE:
@
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern. After all of
the bolts are fully loosened, remove them.
EAS00363
CHECKING THE OIL PUMP
1. Check:
• oil pump shaft 1
• oil pump housing 2
• oil pump housing cover 3
Cracks/damage/wear → Replace the defec-
tive part(s).
2. Measure:
• inner-rotor-to-outer-rotor-tip clearance a
• outer-rotor-to-oil-pump-housing
b
Out of specification → Replace the oil
pump.
1 Inner rotor
2 Outer rotor
3 Oil pump housing
Inner-rotor-to-outer-rotor-tip
clearance
Outer-rotor-to-oil-pump-housing
clearance
5 - 62
ENG
0.09 ~ 0.15 mm
0.03 ~ 0.08 mm
clearance