Yamaha FJR1300N 2001 Service Manual page 43

Instrument panel
Function indication
The indications of the self-diagnosis function can be checked and inspection operations can be per-
formed through the use of the multi-function meter on the instrument panel.
Based on the signals received from the sensors, the ECU inputs the signals into the multi-function
meter. Then, the conditions of the sensors appear on the clock and trip/odometer display of the
multi-function meter.
1. ECU transmission data and meter display
Mode ECU transmission data
Common to all
modes
Normal mode
CO/DIAG mode
selection
CO adjustment
mode
CO adjustment volume
DIAG mode
Diagnosis sensor value
Note: If the exchange of data between the ECU and the meters is abnormal, the clock LCD shows
error "Er-1~4". The clock LCD reverts to showing the time after the error has been corrected.
Km/h
1 Fuel meter
2 Clock
Vehicle speed
Engine warning
indicator lamp
Self-diagnostic fault
code
Coolant temperature
CO/DIAG selection
CO adjustment
cylinder No.
Diagnostic code
180
200
220
240
260
280
3 Coolant temperature
meter
4 TRIP meter
FEATURES
Meter indication
Trip meter
Indicator lamp
Clock LCD
Coolant tempera-
ture meter LCD
Clock LCD
Clock LCD
Trip LCD
Clock LCD
Trip LCD
F
L
H
TRIP km
mile
TRIP
km
E
ODO
mile
SELECT RESET
5 TRIP/ODO meter
6 RESET button
7 SELECT button
1 - 32
GEN
INFO
Display description
4 digits including decimals
ON/OFF
Shows trouble code in numbers
Coolant temperature
Shows CO or DIAG in letters
Shows adjustment cylinder No.
in numbers
Shows adjustment volume in
numbers
Shows diagnostic code in num-
bers
Shows data for sensors
8 Engine trouble warn-
ing light
9 Oil level warning light