Yamaha FJR1300N 2001 Service Manual page 604

The "Barbarian Jumper Mod"
Using a small piece of stiff wire (I used some .030 MIG wire, but a paperclip
or safety pin would probably work) gently push up from the ECU side of the
connector to lift the wire to pin 27 and the white plug in pin 25. Do not force
anything! The metal terminal ends on the wires are fragile and easily
damaged. Lift the pin out with tweezers or needlenose pliers.
http://www.micapeak.com/bike/FJR1300/howto/jumper.html (6 of 9) [15/05/2003 5:41:02 PM]