Yamaha FJR1300N 2001 Service Manual page 245

FRONT AND REAR BRAKES
2. Tighten:
• brake torque rod
• wheel axle nut
• wheel axle pinch bolt
3. Install:
• brake caliper
(temporarily)
• copper washers 1
• brake hose 2
• union bolt 3
WARNING
@
Proper brake hose routing is essential to
insure safe motorcycle operation. Refer to
"CABLE ROUTING".
CAUTION:
@
When installing the brake hose onto the
brake caliper, make sure the brake pipe a
touches the projection b on the brake cali-
per.
4. Remove:
• brake caliper
5. Install:
• brake pad springs
• brake pads
• brake caliper
• retaining bolts
Refer to "REPLACING THE REAR BRAKE
PADS".
4 - 43
CHAS
30 Nm (3.0 m · kg)
125 Nm (12.5 m · kg)
16 Nm (1.6 m · kg)
New
30 Nm (3.0 m · kg)
26 Nm (2.6 m · kg)