Dhcp Connection To Mac - Sagem F@st 908 Reference Manual

SAGEM F@st
3.2.2

DHCP connection to Mac

In MacOS X, for example, proceed as follows:
1
Click the
menu bar,
Preferences", then click the "Network"
icon and the screen opposite appears.
The Location: field should contain
Automatic.
The Show: field should contain Built-in
Ethernet.
2 Select the TCP/IP tab and the relevant panel appears.
3 The Configure: field should contain Via DHCP by default. If not, select this setting from the
drop down list.
Note: If the Via PPP setting appears, select the PPPoE tab, then uncheck the Connect
using PPPoE box.
4 Click Apply to enable connection in DHCP mode.
Note: The DHCP client, DNS servers and Search domains fields are optional.
TM
908 / 948 Reference Manual - Ethernet Interface
(apple) menu in the
select "System
25