Resolving The Card Surface Debris Problems - FARGO electronics Persona Persona M30e User Manual

RESTRICTED USE ONLY

Resolving the Card Surface Debris problems

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
•
Symptom: Prints have spots (white or colored voids) and/or dust on them
(See sample image below).
•
Printer Error State: None
•
Driver Monitor Error Display: None..
2 Ensure the cards are clean and stored in a dust-free environment. Do not use
cards with embedded contaminants in the surface.
3 Clean the inside of the Printer. See Cleaning the Printer's Interior
4 Clean the Cleaning Roller. See Cleaning the Platen and the Card Feed Rollers.
Persona M30e Card Printer User Guide (Rev. 1.1)
Fargo Electronics, Inc.
4-38