RESTRICTED USE ONLY
Resolving a Ribbon RFID Error (Ribbon RFID Antenna is Corrupted)
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step
Procedure
1
Review the following information.
•
Symptom: Printer RFID Sensor does not detect a recognizable signal from
the Ribbon.
•
Printer Error State: The Ribbon tag information is corrupted or incorrect.
•
Driver Monitor Error Display: Ribbon RFID Error
Persona M30e Card Printer User Guide (Rev. 1.1)
Fargo Electronics, Inc.
4-9