Resolving The Card Surface Debris Problems - FARGO electronics Persona C30 User Manual

RESTRICTED USE ONLY

Resolving the Card Surface Debris problems

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.

Symptom: Prints have spots (white or colored voids) and/or dust on them
(See sample image below).

Printer Error State: None

Driver Monitor Error Display: None
2 Ensure the cards are clean and stored in a dust-free environment. Do not use
cards with embedded contaminants in the surface.
3 Clean the inside of the Printer. See
4 Clean the Cleaning Roller. See
Persona C30 Card Printer User Guide (Rev. 2.2)
Cleaning the Printer's
Cleaning the Card Feed and Cleaning
Fargo Electronics, Inc.
Interior.
Rollers.
4-40