Table of Contents
Advertisement
RESTRICTED USE ONLY
Upgrade the Printer Firmware (Continued)
Step
Procedure
4
a. Prepare the printer for the Firmware upgrade.
b. Press and hold down the Power and Pause buttons on the Printer (while
you plug in the power). (Note: Both lights will blink slowly.)
5
From the Workbench screen, select Send File To Printer. (Note: Both lights
will flash very fast while the Firmware is going through the update process.)
6
Upon successful completion of the Firmware Update, the Printer will restart.
(Note: The lights will remain solid.)
7
The procedure is now completed.
Persona M30e Card Printer User Guide (Rev. 1.1)
Fargo Electronics, Inc.
8-4
Advertisement
Table of Contents
