Table of Contents
Advertisement
RESTRICTED USE ONLY
Using the Defined Area Option (continued)
Step
Procedure
2
When the card grid is first activated, a small black square will appear at its
default size of .2" x .2" / 5mm x 5mm and at its default location in the lower left-
hand corner (0, 0). This square represents the first defined area.
•
Determine the area of the card needed to define for a signature panel with
a different size and location than the Driver's standard Omit Signature
Area setting. (Note: This area is indicated by the dashed outline.)
•
Determine the area size by actually printing a card and looking at it in the
same orientation as when it exits the Printer.
3
Measure the total size of the desired area and enter those dimensions into the
dimension boxes. (Note: The minimum size an area is .2" x .2" / 5mm x
5mm.)
Persona M30e Card Printer User Guide (Rev. 1.1)
Karen Atkins
Access Level-2
ID# 1234478
1.9"
Fargo Electronics, Inc.
.35"
5-61
Advertisement
Table of Contents
