RESTRICTED USE ONLY
Resolving a Ribbon Out Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
DELETE THIS LINE Note: Using the printer in direct sunlight may adversely affect the
ribbon sensor integrity.
Step
Procedure
1
Review the following information.
•
Symptom: Printer will not print.
•
Printer Error State: The Ribbon Sensor has detected the End Of Ribbon
mark
•
Driver Monitor Error Display: Ribbon Out
2
Replace the Ribbon Cartridge
a. Press on the Resume button.
Persona M30e Card Printer User Guide (Rev. 1.1)
Fargo Electronics, Inc.
4-19