Table of Contents
Advertisement
RESTRICTED USE ONLY
Resolving the Image Placement problems (continued)
Step
Procedure
4
Verify if the Vertical Image Position Setting is set correctly or incorrectly. See
the graphic below.
a. Adjust the value as described below:
•
If the white border is on the top edge of the card, adjust the Vertical value
by +2.
•
If the white border is on the bottom edge of the card, adjust the Vertical
value by -2.
b. Click on OK.
c. Run a self-test.
d. If the white border is diminished, continue the adjustment until it is gone.
Persona M30e Card Printer User Guide (Rev. 1.1)
Fargo Electronics, Inc.
4-45
Advertisement
Table of Contents
