Table of Contents
Advertisement
ECO FUNCTION
(For versions/markets, where provided)
To activate the function press the
ECO (A) fig. 211 button. An icon and
a dedicated message appear on the
instrument panel display when the
function is engaged.
This function is stored, so when the
vehicle is started again, the system
keeps the setting it had before the
engine was stopped. Press the ECO
button again to disable the function
and restore the normal driving setting.
In the event of a malfunction with the
function on, the system automatically
disables the ECO function and restores
the normal driving setting.
211
174
SPEED LIMITER
(where provided)
DESCRIPTION
This device allows the vehicle speed to
be limited to a value set by the driver.
The maximum speed can be set both
with vehicle stationary and in motion.
The minimum speed that can be set is
30 km/h.
When the device is active, the vehicle
speed depends on the accelerator
pedal, until the programmed speed
limit is reached (see "Speed limit
programming" paragraph).
ACTIVATING THE DEVICE
To activate the device press button (A)
on the steering wheel fig. 212.
F1A0700
212
When the device is enabled, it is
indicated by the "LIM" symbol being
shown on the display along with the
last speed set.
If the Adaptive Cruise Control has been
activated previously, button (A) fig. 212
must be pressed twice. The first press
switches off the function activated
previously; the second press activates
the Speed Limiter.
SPEED LIMIT
PROGRAMMING
The speed limit can be programmed
without necessarily activating the
device.
To store a speed value higher than
the displayed one, briefly press the
SET + button. Each time the button
is pressed, the speed increases by
about 1 km/h while keeping the button
pressed, the speed increases by
10 km/h.
To store a speed value lower than the
displayed one, press the SET – button.
Each time the button is pressed, the
speed decreases by about 1 km/h
while keeping the button pressed, the
speed decreases by 10 km/h.
DEVICE
ACTIVATION/DEACTIVATION
Device activation: press the SET + or
SET – buttons.
F1A0732
The activation of the device is indicated
by the green "LIM" symbol on the
display.
Advertisement
Table of Contents
