Table of Contents
Advertisement
204
Versions with 7" multifunction
display
The following indications fig. 205
appear on the display:
in sequential mode: gear
engagement, through the numerical
indication (A) fig. 205.
in automatic mode: the selected
gear (P, R, N, D1, D2, D3, D4, D5, D6)
(B) fig. 205;
166
205
GEAR LEVER
137) 138) 139) 140) 141) 142)
The (A) fig. 206 lever has the following
positions:
P = Park
R = Reverse
N = Neutral
D = Drive, (automatic forward speed)
F1A0772
AutoStick: + shifting to higher gear
in sequential driving mode; – shifting to
lower gear in sequential driving mode.
To select the "sequential" mode, shift
the gear lever from D (Drive) towards
the left. The reachable positions are +
(higher gear) or - (lower gear). These
positions are unstable: the gear lever
always returns to central position.
The gear lever has a button which must
be pressed to move the lever to P or R.
F1A0697
206
LEVER POSITIONS
Park (P)
45)
46)
The transmission is mechanically
locked in position P.
The ignition key can be removed only
when the lever is in position P.
The lever must only be moved from P
to D when the vehicle is stationary and
the engine at idling speed.
With the ignition key in the MAR
position, press the brake pedal and use
the button located on the gear lever to
shift the selector lever from P to any
other position.
WARNINGS
Never try to select position P when
the vehicle is moving.
Before leaving vehicle, apply the
electric parking brake and set the gear
lever to this position.
F1A0665
Advertisement
Table of Contents
