Table of Contents
Advertisement
Configuring the PoS Module
Displaying SONET Port Status Information
To display status information for the SONET ports, use the following command:
show sonet {<portlist>} {detail}
You can use the optional
the command displays; otherwise, the command displays the status information for all
ports.
By default, the command displays a summary of status information for the specified
ports. You can use the optional
for the specified ports.
The summary of status information includes the following information for each port:
• Values of all port configuration parameters
• Port state
• Any active events
The detailed status information includes the summary information plus any SONET
statistics (listed and described in Table 3-3).
Table 3-3: Summary of SONET Statistics
Statistic
Section parity errors
Line parity errors
Path parity errors
REI-L event counter
REI-P event counter
LOS event counter
LOF event counter
LOP event counter
AIS-L event counter
AIS-P event counter
RDI-L event counter
RDI-P event counter
3-18
parameter to narrow the range of status information
portlist
keyword to display detailed status information
detail
Description
Number of B1 parity errors detected
Number of B2 parity errors detected
Number of B3 parity errors detected
Number of B2 parity errors detected by peer LTE
Number of B3 parity errors detected by peer PTE
Number of LOS events
Number of LOF events
Number of LOP events
Number of AIS-L events
Number of AIS-P events
Number of RDI-L events
Number of RDI-P events
Packet Over SONET Module Installation and User Guide
Advertisement
Table of Contents
