Qos Monitor; Intra-Subnet Qos - Extreme Networks PoS Installation And User Manual

Displaying RED Configuration Information for PoS Module Ports
While the syntax of the existing
the output of the command now displays the RED and DiffServ configuration
parameters associated with PoS module ports.
To display QoS, RED, and DiffServ information for a specified PoS port, use the
following command:
show ports info detail
For PoS ports, the existing
enhanced to display the number of packet transmissions and discards from each
queue (in both egress and ingress directions).

QoS Monitor

The QoS Monitor utility is supported for PoS module ports. The QoS Monitor and its
associated ExtremeWare commands are described in the ExtremeWare Software User
Guide.

Intra-Subnet QoS

Intra-Subnet QoS (ISQ) is not supported on switches that use the "i" chipset; the PoS
module is supported only on switches that use the "i" chipset.
Packet Over SONET Module Installation and User Guide
show ports info detail
show ports qosmonitor
Configuring QoS Functions
command has not changed,
command has also been
3-59