Configuring The Pos Module - Extreme Networks PoS Installation And User Manual

3

Configuring the PoS Module

This chapter describes the ExtremeWare commands that support the PoS module. Other
commands and background information used to configure I/O modules and switch
behavior in a network are documented in the ExtremeWare Software User Guide. For
hardware installation information on the BlackDiamond 6800 series switch, see the
BlackDiamond Hardware Installation Guide.
Documentation for Extreme Networks products is available on the World Wide
Web at the Extreme Networks home page at http://www.extremenetworks.com/.
This chapter includes information on the following topics:
• Basic PoS Module Configuration Information on page 3-2
• Configuring and Monitoring SONET Ports on page 3-12
• Configuring and Monitoring PPP Functions on page 3-22
• Configuring VLAN-Related Attributes on page 3-38
• Configuring Forwarding Database Attributes on page 3-42
• Configuring Spanning Tree Attributes on page 3-42
• Configuring QoS Functions on page 3-43
• Configuring and Monitoring Flow Statistics on page 3-60
• Configuring and Monitoring APS Functions on page 3-75
• Configuring Port Tunneling on page 3-97
• Additional PoS Module Support Topics on page 3-101
Packet Over SONET Module Installation and User Guide 3-1