Installing Or Replacing A Pos Module; Preparing For Installation - Extreme Networks PoS Installation And User Manual

2
Installing or Replacing a
PoS Module
This chapter includes information on the following topics:
• Preparing for Installation on page 2-1
• Inserting and Securing a Module on page 2-7
• Making Network Interface Cable Connections on page 2-9
• Verifying the Module Installation on page 2-10
• Troubleshooting on page 2-11
• Removing and Replacing an I/O Module on page 2-16

Preparing for Installation

This section describes the preparation steps that you must perform before inserting and
securing a PoS module. This section includes information on the following topics:
• Software and Hardware Version Requirements on page 2-2
• Cables and Connectors on page 2-3
• Safety Information on page 2-4
• Tools on page 2-5
• I/O Module Slot Locations on page 2-5
Packet Over SONET Module Installation and User Guide 2-1