Comtech EF Data XTD-750C-B1 Operation And Installation Manual page 64

7. For High Voltage to be applied place the HV ON switch in the ON
8. If a fault occurs the LED will turn red. To reset the fault press the HV
9. To control the HPA with a remote controller place the High Voltage
MNC-0300-036
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
position.
switch to the RESET position (all the way down).
switch in the OFF position and place the LOCAL/REMOTE switch in
the REMOTE position.
26 of 26
Unpacking and Installation
Revision E