Table of Contents
Advertisement
Ladder Hazards
MNC-0200-001
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
To prevent electrical shock when servicing a Klystron Tube or a 2 kW
Power Amplifier:
ensure the Bus Indicator LED located in the Power Supply Drawer
•
High Voltage side is out.
use shorting probe before taking measurements on the capacitor
•
bank.
Failure to comply could result in serious injury or death.
When required to measure voltages in a High Voltage Power Supply:
turn the equipment OFF.
•
use shorting probe to ensure capacitors are discharged.
•
ensure meter probes are properly insulated and capable of handling
•
votlages of 20 kV or more.
attach probes using one hand.
•
ensure probes are not touching other contacts.
•
Failure to comply could result in serious injury or death.
When required to use a ladder ensure that:
the ground in the area where the ladder will be used is free of
•
objects that could cause the ladder to be unstable.
You have read and understand ALL the labels that are affixed to the
•
ladder.
you are wearing all appropriate safety equipment such as hard hat,
•
safety harness, etc.
Failure to comply could result in serious injury or death.
6 of 14
WARNING
WARNING
WARNING
Safety/Sicherheit
Revision E
Advertisement
Chapters
Table of Contents
