Table of Contents
Advertisement
MNC-0000-041
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
3.
If the address or connection speed is unknown, it may be
desirable to run "Advanced Search" from the File Menu
pulldown. (This may take several minutes as all possible
addresses and data speeds are polled to find a configuration that
works.)
4.
Refer to Figure 31. Once connected, set the Unit Address. Each
amplifier needs a unique address for RS-485 communication.
(default is normally "A" unless set up as part of a system). If using
RS232, it will talk to any unit it is directly connected to without an
address.
The Address choices are A, B,...through Z.
Figure 31, Select Address
28 of 34
Operation Addendum, HPA Control Utility
Revision A
Advertisement
Chapters
Table of Contents
