Controlling The Maximum Speed; Emergency Stop - Invacare LiNX DLX-REM110 User Manual

The speed of the wheelchair is proportional to the joystick
deflections, so that the further the joystick is moved from
the neutral position, the faster the wheelchair travels.
If the user moves the joystick back to the neutral position,
the wheelchair slows down and stops.
If the user releases the joystick from any position other
than the neutral position, the joystick returns to the neutral
position and the wheelchair slows down and stops.
1602969-F
The joystick can also be used to wake up the system when
in sleep mode, if this parameter has been enabled by the
provider. Refer to 5.5 The sleep mode, page 21.

5.1.2 Controlling the maximum speed

The speed dial allows you to limit the maximum speed of
the mobility device (that is the speed when the joystick is
fully deflected) to suit your preferences and environment.
The speed dial A offers ten discrete steps between the
lowest speed B and the highest speed C.

5.2 Emergency stop

If you press the ON/OFF button while driving, an emergency
stop is carried out. The remote powers down after this.
Usage
19