Check Engine Valve Clearance - Gasoline/Lpg Models; Check Engine Cylinder Compression - Gasoline/Lpg Models - Genie Z-45/22 Service Manual

Section 4 - Scheduled Maintenance Procedures
TABLE D PROCEDURES
a
d
Gasoline/LPG models
a fuel filter
b hose from the fuel filter to the carburetor
c hose from the fuel pump to the fuel filter
d hose from the fuel shutoff valve to the fuel pump
4 Clean up any fuel that may have spilled during
the installation procedure.
5 Start the machine from the ground controls,
then inspect the fuel filter and hoses for leaks.
If a fuel leak is discovered, keep
any additional personnel from
entering the area and do not
operate the machine. Repair the
leak immediately.
4 - 36
D-4
b
Check Engine Valve Clearance -
Gasoline/LPG Models
Complete information to perform this procedure is
available in the Ford LSG-423 2.3 Litre Industrial
Engine Service Manual (Ford number: 194-216).
Genie part number 29586.
D-5
Check Engine Cylinder
c
Compression - Gasoline/LPG
Models
Complete information to perform this procedure is
available in the Ford LSG-423 2.3 Litre Industrial
Engine Service Manual (Ford number: 194-216).
Genie part number 29586.
Genie Z-45/22
Service Manual - First Edition
Part No. 29487