Gasoline/Lpg Models: Fuel Select Switch; Platform Level Switch; Engine Idle (Rpm) Select Switch; Engine Start Switch - Genie Z-62 Operator's Manual

First Edition • First Printing

11 Gasoline/LPG models: Fuel select switch

Move the fuel select switch to the gasoline
position to select gasoline. Move the fuel
select switch to the LPG position to select
LPG.

12 Platform level switch

Move the platform level switch up and the level
of the platform will raise. Move the platform
level switch down and the level of the platform
will lower.

13 Engine idle (rpm) select switch

Move the engine idle select switch to the turtle
position for low idle.
Move the engine idle select switch to the rabbit
position for high idle.
14 Diesel models: Glow plug switch (if equipped)
Move the glow plug switch to either side and
hold for 3 to 5 seconds.
Part No. 1257653

15 Engine start switch

Move the engine start switch to either side to
start the engine.
16 Platform rotate switch
Move the platform rotate switch to the right
and the platform will rotate to the right. Move
the platform rotate switch to the left and the
platform will rotate to the left.
17 Emergency power switch with cover
Use emergency power if the primary power
source (engine) fails.
Simultaneously hold the emergency power
switch on and activate the desired function.
18 Turntable rotate switch
Move the turntable rotate switch to the right
and the turntable will rotate to the right. Move
the turntable rotate switch to the left and the
turntable will rotate to the left.
Z-62/40
Operator's Manual
Controls
23