Table of Contents
Advertisement
Checking drive chain tension
Important
Have chain tension adjusted by a Ducati Dealer
or authorised Service Centre.
-
Make the rear wheel turn until you find the
position where chain is tightest;
-
with a finger, push down the chain at the point of
measurement and release;
-
set the motorcycle on the side stand;
-
measure the distance (A) between the centres of
the chain pin, placing the tape measure between
the plastic and the swinging arm in front of the
retaining screw (B), it must be: A = 45 ÷ 47mm
(1.77 ÷ 1.85 in);
Important
This only applies to the motorcycle STANDARD
settings, available upon delivery.
A
A
B
Fig 181
201
Advertisement
Table of Contents
