Table of Contents
Advertisement
®
Type: Stylema
monobloc M4.32, radial mount (ABS
Cornering EVO).
Number of pistons per calliper: 4.
Friction material: BRM11E HH.
Brake lever master cylinder diameter: 18 mm (0.71 in).
REAR
With fixed drilled stainless steel disc.
Disc diameter: 245 mm (9.6 in).
Disc braking surface: 190 sq. cm (29.45 in
Brake disc thickness: 5 mm (0.2 in).
Maximum wear on disc thickness: 4.5 mm (0.18 in).
Hydraulically operated by a pedal on RH side.
Brake calliper make: BREMBO.
Number of pistons per calliper: 2.
Calliper piston diameter: 34 mm (1.73 in).
Bosch Cornering EVO ABS as standard.
Friction material: Ferodo Ferit I/D 450 FF.
Master cylinder type: PS 13.
Master cylinder diameter: 13 mm (0.51 in).
Attention
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the affected area with abundant running water.
234
Transmission
Hydraulically-controlled slipper/self-servo wet
multiplate clutch controlled by the lever on left-
hand side of the handlebar.
Drive is transmitted from engine to gearbox primary
shaft via spur gears.
Primary drive: 1.80:1
Front chain sprocket/clutch gearwheel ratio: 30/53
6-gear gearbox with Ducati Quick Shift (DQS) up/
2
).
down EVO2, gear change pedal on left side of
motorcycle.
Gearbox output sprocket/rear chain sprocket ratio:
15/43
Total gear ratios:
st
1
gear 15/37
nd
2
gear 16/30
rd
3
gear 18/27
th
4
gear 20/25
th
5
gear 22/24
th
6
gear 24/23
Drive chain from gearbox to rear wheel.
Make: chain REGINA 520 ZRDK
Links: 106
Advertisement
Table of Contents
