Table of Contents
Advertisement
If the teach-in procedure is completed correctly, the
instrument panel shows "Completed" followed by
the previous menu after a few seconds.
If the calibration procedure is aborted by the user,
the instrument panel shows "Aborted" followed by
the previous menu after a few seconds.
If, on the other hand, an error or malfunction occurs
during the calibration procedure, the instrument
panel shows "Failed" followed by the previous menu
after a few seconds.
Note
During the calibration procedure, the
procedure will stop if the vehicle speed exceeds 100
km/h (62 mph) or the key is turned off.
Default
-
Enter the SETTING MENU.
-
Use the navigation buttons to select "Tire
Calibration" option and press ENTER button.
-
Select the "Default" option and press ENTER
button to restore default values.
-
The message "Default Please Wait.." is displayed
and after a while "Default Ok" for 2 seconds,
then followed by the previous menu.
Tire Setting
Completed
Keep Speed
48 - 52 km/h
and Gear 2
Sport
50
km/h
2
Gear
Fig 87
113
Advertisement
Table of Contents
