Table of Contents
Advertisement
DRL in "Auto" mode – only for version with
DRL lights
If the DRL was set to "Auto" via the "DRL" function
within the SETTING MENU (see "SETTING MENU -
DRL"), the instrument panel automatically manages
the DRL and the low beam according to detected
ambient light:
-
if the instrument panel detects good light
conditions (day) the DRL is turned on and the
low beam is turned off;
-
if the instrument panel detects poor light
conditions (night) the DRL is turned off and the
low beam is turned on.
When the DRL is set to AUTO mode, the display
shows the warning light indicated in the figure.
If the DRL was set to "Auto" mode, press button
(5, Fig 6) to disable that mode and set manual light
management. Press again button (5, Fig 6) to re-
enable DRL but with control strategy set to
"Manual".
In this case, upon next Key-On, DRL will be again set
to "Auto" mode.
134
120
°C
0
SPORT
km/h
A
260
TOT
km
Attention
Using the DRL light in "Auto" mode in case of
poor light conditions, especially in case of fog or
clouds, could impair safety. In this case Ducati
recommends to manually activate the low beam.
12:34
8
9
7
10
6
11
N
5
12
Gear
DDA
4
EBC
3
DQS
DTC
2
1
ABS 1
DWC
RPM X 1000
Fig 114
PM
OFF
3
U/D
3
1
Advertisement
Table of Contents
