Ducati PANIGALE Owner's Manual page 113

Start
- Enter the SETTING MENU.
- Use the navigation buttons to select "Tire
Calibration" option and press ENTER button.
- Select the "Start" option and press ENTER
button.
When the calibration procedure starts, the
instrument panel displays the message "Ready"
flashing, the message "Keep Speed" with speed
range and the gear to be maintained by the user to
complete the teach-in procedure. On the RH side is
the reference Riding Mode, current speed and gear
engaged.
Important
The teach-in procedure is allowed only at a
vehicle speed between 48 Km/h (30 mph) and 52
Km/h (32 mph) in the 2rd gear.
When the rider complies with the required
conditions of speed and gear indicated, the
instrument panel starts system calibration: all
previous information will be displayed showing "In
progress" instead of "Ready".
Calibration is performed by keeping speed and gear
within the indicated range for 5 seconds.
112
Tire Setting
Ready
Keep Speed
48 - 52 km/h
and Gear 2
The procedure can be aborted by holding depressed
the UP button for 2 seconds: in this case the
instrument panel shows displays all previous
information, replacing message "In progress" with
message "Aborted", followed by the previous menu
after a few seconds.
Sport
50
km/h
2
Gear
Fig 86