Dqs Indicator - Ducati PANIGALE Owner's Manual

DQS indicator

The instrument panel displays DQS current level.
The level can be customised using the Riding Mode
function present in the SETTING MENU.
If DQS is in degraded operation mode, relevant
indication is displayed flashing.
If DQS system is disabled, "Off" is displayed.
When in fault, the red "Err" message is displayed
instead of the level.
The DQS with up/down feature allows the rider to
upshift and downshift without using the clutch lever.
It includes a two-way microswitch - built in the lever
mechanism - that outputs a signal to the engine
control unit whenever the gearshift is operated.
The system works in a different way when upshifting
and downshifting.
Tips on how to best exploit the DQS function:
- The Ducati Quick Shift takes the same shift lever
operation as with vehicle not equipped with the
Ducati Quick Shift.
Ducati Quick Shift is not designed for shifting
automatically.
- For any gearshift request (upshifting or
downshifting) the rider has to move the shift
120
°C
0
SPORT
km/h
260
TOT km
lever from its idle position in the desired
direction against the force of the spring through
a certain over-travel, then keep the shift lever in
this position until the gearshift is completed.
Once the gearshift has been completed, the
lever has to be fully released in order to allow
another gearshift acted by Ducati Quick Shift. If
the rider does not move the shift lever up to end
stroke during a Ducati Quick Shift request, gears
may not be fully engaged.
- Ducati Quick Shift provides no assistance for the
gearshift if the rider uses the clutch lever: the
12:34
8
9
7
10
6
11
N
5
12
Gear
DDA
4
EBC
3
DQS
DTC
2
1
ABS 1
DWC
RPM X 1000
Fig 19
PM
OFF
3
U/D
3
1
59