Epson GQ-3500 User Manual page 94

Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Selects a character set specified by nl and i-12 as shown in the following
table. If nl and n2 are outside the given ranges, or character sets that
are not available are specified, the command is ignored. It will also be
ignored if the specified character set does not match the current page
orientation.
Table A-l. Character sets
nl n2
0
1
2 0 to 7+*
* If you are using two font cards, the fonts in the card in the A slot are
numbered 0 -X, and the numbering of the fonts in the B slot begins with
from the download font number. For example, to select download font 2,
specify font 1.
ESC t
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The extended graphics font includes a range of character graphics.
When you turn
on
closest size to the font that you are using is selected. The following
values can be used for n:
1: Mode is turned ON.
A-18
ESC y
121
27
79
Internal character set
IC card character set
Download character set
Turn Extended Graphics Mode On/Off
ESC
27 116
74
the extended graphics font, the font that is
Select Character Set
nl n2
nl n2
nl n2
n
n
n
Page Printer Commands
the
-