Selectype Functions And Options - Epson GQ-3500 User Manual

After selecting the option you
3.
the FUNCTION 1
these steps until you
Exiting SelecType mode
To exit SelecType mode, press the
at the bottom of the status indicator goes out. The printer remembers
your selections until the power is turned off or until you change them.
Note
These settings override your DIP switch settings and they can be
overridden by software commands.

SelecType Functions and Options

The SelecType functions and their options are described below.
Function 0: Paper Size
Selects the size of the paper you are using. Using a paper size
different your selection results in a PU error.
from
0
1
2
4
5
6
7
Function 1: Number of Copies
Selects single or multiple copies (up to 9). If more than 9 copies
have been selected by a software command, the option position
displays three horizontal bars.
1-9
SelecType
button again to move to the
selected all the options you need.
have
Description
Other -Use this setting when your paper
doesn't match any of
A4 - 21Omm x 297mm
A5 - 148mm x 21Omm
B5 - 182mm x 257mm
Letter - 8-l /2" x 11"
Half Letter - 5-l /2" x 8-l/2"
Legal - 8-l /2" x 14"
Description
Number of copies of each page to print
either exit SelecType or press
want,
next
button. The blinking dot
SHIFT
paper size options.
the
function. Repeat
3 - 3