Epson GQ-3500 User Manual page 102

ESC +
Format:
Decimal:
Hexadecimal:
Comments:
Shifts the character base line from the standard base line position. To
find n, calculate the displacement required in units of the minimum
increment specified by ESC q. The displacement must be from 0 - 127. If
the base line is to be moved up, subtract the displacement from 256. If
the amount of base line movement exceeds the current line spacing the
command is ignored.
ESC u
Format:
Hexadecimal:
Comments:
The following values can be used for n:
1: Cell top edge alignment
2: Cell bottom edge alignment
3: Character center alignment
4: Cell center alignment
The position of a character is determined according to the position of
the preceding character.
A-26
ESC
27
ESC u
27 117
75
Move Base Line
n
n
n
Character AliPnment
n
n
n
Page Printer Commands
-
-