Epson GQ-3500 User Manual page 151

Environment
Temperature
Operation: 50" F to 90" F (10' C to 32" C)
Storage: -20" F to 109" F (-29" C to 43" C)
Humidity
Operation: 20% to 80%
Storage: 10% to 90%
Transportation
There are several precautions you should take when packing the
printer for transportation. You should try to pack it as closely as
possible to the way it was packed when you first received it.
The following points are especially important:
Remove the drum cartridge from the printer and put it in its
original packing materials.
Remove the toner cartridge. If the cartridge is not yet empty, this
will cause toner to spill into the printer. Remove the spilled toner
with a small vacuum cleaner.
Push back the reset lever shown on page 5-12 while you close the
top of the printer. If you do this carefully, the reset lever will go
behind a connector in the bottom part of the printer and will be
protected from vibration during transportation.
After locating the printer in a new place, go through the setting up
procedure as described in Chapter 1. Be sure to install the new drum
cartridge and toner cartridge.
E-4
Specifications