Maintenance And Status Messages; Status Messages - Epson GQ-3500 User Manual

Chapter 5

Maintenance and Status Messages

The GQ-3500 STATUS
exists that may interfere with your printing. You can correct most of
these conditions by maintaining your printer as suggested and by
following the simple instructions below.

Status Messages

Status messages are two-digit codes shown
indicator on the control panel. Some of these messages display in
conjunction with indicator lights.
The status messages described in this chapter indicate those
conditions that you can easily correct, as well as more serious conditions
that require a call to a service technician. The status messages are:
- -
Indicates that the printer is warming up. While the printer is
warming up, input data may be received and the printer may be
set off line or on line.
.
Indicates that the GQ-3500 is in SelecType mode (described in
Chapter 3). To exit SelecType mode, press
When printing is in progress, the
countdown and displays to the user the number of copies left to be
printed out. (The number shown here is an example.) To cancel
printout of remaining copies, set the printer off line and press the
button. The indicator stops flashing if a jam occurs.
SHIFT
Indicates that the GQ-3500 is in test mode (described in
Chapter 1). To exit test mode, press the
Same as UC, except that it prints a character test pattern instead
of a vertical line test pattern.
Maintenance and Status Messages
indicator messages tell you if some condition
STATUS
the LED status
on
button.
the SHIFT
indicator performs a
button.
ON LINE
5-1