Ic Card Status Messages - Epson GQ-3500 User Manual

In conjunction
paper out. Add paper according to the instructions in Chapter 4.
Make sure that the paper tray is fully inserted and that the
paper set lever is raised. After you correct the condition,
printing resumes; no data is lost.
Paper size being used is different from the paper size selected.
See the Paper Status Messages section of this chapter.
In conjunction
toner out. See the User Maintenance section of this chapter.
In conjunction
that the collector unit and lens shield should be replaced. See
User Maintenance section of this chapter.
the
In conjunction
that the drum cartridge and lens shield should be replaced. See
the User Maintenance section of this chapter.
IC Card
Status Messages
Indicates one of the following IC card problems. To correct the problem,
make sure the
first
described below and press the
information, see the instructions packaged
1. IC card installed only in slot B, or identity card installed in slot
Put the IC card in slot A.
2. IC card is unreadable. Clean the gold connectors (contacts)
IC card socket, or use a different card.
Indicates that the total IC card capacity exceeds 2M bytes, or that the
total number of font card fonts is greater than 16. Change the
Maintenance and Status Messages
with a flashing PAPER OUT
with a flashing TONER OUT
with a USER MAINTENANCE
with a USER MAINTENANCE
indicator light is off. Then correct as
ON LINE
ERROR CLEAR
light, indicates
light, this indicates
light, this indicates
light, this indicates
button. (For more
the IC card.)
with
B.
the
and
5 - 3