Epson GQ-3500 User Manual page 92

Margins
ESC (
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Specifies margins (top, bottom, left, and right) within a specified page.
The following values can be used for nl, which specifies the paper size:
0: Same as physical paper size
1: A4 fed lengthwise
2: A5 fed lengthwise
4: B5 fed lengthwise
5: Letter fed lengthwise
6: Half Letter fed lengthwise
The next eight characters are used to set the margins: n2 and
the top margin; n4 and n5 specify the bottom margin; n6 and n7 specify
the left margin; n8 and n9 specify the
margin is specified in units of the minimum increment, using the
formula: total distance = nl + (n2 x 256). The minimum increment is
specified with ESC q. The margins are cleared if the paper size is
changed. Margins must be less than 5461 in dots.
Print position movement
ESC 1
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Specifies the position at which subsequent data is printed. The values
of nl and n2 specify the distance of
the X (horizontal) direction; n3 and n4 specify the distance of the print
position from the origin in the Y (vertical) direction. In each case, the
distance is specified in units of the minimum increment, using the
formula: total distance = nl + (n2 x 256). The minimum increment is
specified with ESC q.
A-16
ESC (
40
27
28
9: A4 fed sideways
10: A5 fed sideways
12: B5 fed sideways
13: Letter fed sideways
14: Half Letter fed sideways
15: Legal fed sideways
right
Set Absolute Print Position on Page
ESC )
41
27
29
print position from the origin in
the
Set PaPe Format
n2 . . . n9
nl
n2 . . . n9
n2 . . . n9
nl
margin. In each case, the
nl n2 n3
nl n2 n3
nl n2 n3
Page Printer Commands
specify
n3
n4
n4
n4